Your panels. The right connection.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 15 AWithin limit

✓Power per used input

400 WLimit: ≤ 500 WWithin limit

One 11–60V input, 15A and 500W maximum.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 15 AWithin limit

✓Power per used input

400 WLimit: ≤ 500 WWithin limit

Two independent 11–60V inputs; each accepts 15A and 500W, for 1,000W total.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 12.5 AWithin limit

✓Power per used input

400 WLimit: ≤ 600 WWithin limit

The cited guide limits current to 10A from 11–32V and 12.5A from 32–60V, with 600W maximum.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 14.5 AWithin limit

✓Power per used input

400 WLimit: ≤ 600 WWithin limit

One XT60i input: 11–28V at 8.2A, then 29–60V at 14.5A, with 600W maximum.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 12–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 20 AWithin limit

✓Power per used input

400 WLimit: ≤ 1,000 WWithin limit

The manual treats the two MC4 pairs as parallel feeds into one 12–60V, 20A and 1,000W DC input. Use matched panel groups.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 15 AWithin limit

✓Power per used input

400 WLimit: ≤ 500 WWithin limit

Two independent 11–60V inputs; each accepts 15A and 500W, for 1,000W total.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 12–145 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 145 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 15 AWithin limit

✓Power per used input

400 WLimit: ≤ 1,200 WWithin limit

One 12–145V input, 15A and 1,200W maximum. Keep the complete string open-circuit voltage inside the documented range.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 12 AWithin limit

✓Power per used input

400 WLimit: ≤ 700 WWithin limit

Two DC8020 inputs share a 1,400W ceiling. Jackery documents 11–17.5V at 8A and 17.5–60V at 12A per input, with 24A combined maximum.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 12–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 12 AWithin limit

✓Power per used input

400 WLimit: ≤ 500 WWithin limit

Two DC8020 inputs share a 1,000W ceiling. Jackery documents 12–16V at 8A and 16–60V at 12A per input, with 24A combined maximum.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 12 AWithin limit

?Power per used input

400 WLimit: ≤ 200 WVerify

Two DC8020 inputs share a 400W ceiling. Jackery documents 11–16V at 8A and 16–60V at 12A per high-voltage input, with 21A combined maximum.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Do not assume extra panel wattage is accepted. The manufacturer must approve oversizing; an input may clip or reject it.

Modeled power ceiling: 200 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–165 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 165 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 17 AWithin limit

✓Power per used input

400 WLimit: ≤ 1,600 WWithin limit

This check models the 11–165V, 17A and 1,600W high-PV input. A separate low-PV input accepts 11–60V, 17A and 800W; together Anker lists 2,400W total.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Only the listed primary input is modeled. This station has another, different PV input that this result does not model.

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 27 AWithin limit

✓Power per used input

400 WLimit: ≤ 1,200 WWithin limit

Two XT60 inputs accept up to 1,200W each. Current bands depend on firmware: newer firmware lists 10A at 11–15V and up to 27A at 15–60V; verify the installed firmware before designing an array.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 30–150 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 150 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 15 AWithin limit

✓Power per used input

400 WLimit: ≤ 1,600 WWithin limit

This check models the 30–150V, 15A and 1,600W high-PV input. A separate low-PV input accepts 11–60V, 20A and 1,000W; together EcoFlow lists 2,600W total.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Only the listed primary input is modeled. This station has another, different PV input that this result does not model.

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 12–58 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 58 VWithin limit

×Current per used input

10.6 ALimit: ≤ 10 AOutside limit

✓Power per used input

400 WLimit: ≤ 500 WWithin limit

One 12–58V input, 10A and 500W maximum.

Short-circuit current (Isc): 11.4 A per used input. Above the modeled current limit: ask the manufacturer to confirm Isc acceptance.

Calculation assumes: 1 identical strings across 1 used input(s).

✓Charging voltage

37.6 VLimit: 12–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

×Current per used input

10.6 ALimit: ≤ 10 AOutside limit

✓Power per used input

400 WLimit: ≤ 500 WWithin limit

One 12–60V DC7909 input, 10A and 500W maximum. Panel Voc must remain below 60V.

Short-circuit current (Isc): 11.4 A per used input. Above the modeled current limit: ask the manufacturer to confirm Isc acceptance.

Calculation assumes: 1 identical strings across 1 used input(s).

✓Charging voltage

37.6 VLimit: 32–58.4 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 58.4 VWithin limit

×Current per used input

10.6 ALimit: ≤ 8 AOutside limit

✓Power per used input

400 WLimit: ≤ 400 WWithin limit

Two SDC inputs; each is documented at 32–58.4V, 8A and 400W maximum. External MPPT modules are required.

Short-circuit current (Isc): 11.4 A per used input. Above the modeled current limit: ask the manufacturer to confirm Isc acceptance.

Calculation assumes: 1 identical strings across 1 used input(s).

✓Charging voltage

37.6 VLimit: 16–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

×Current per used input

10.6 ALimit: ≤ 10.5 AOutside limit

?Power per used input

400 WLimit: ≤ 200 WVerify

Two parallel DC8020 inputs; each supports 200W and 10.5A, for 400W total with matched panel groups.

Short-circuit current (Isc): 11.4 A per used input. Above the modeled current limit: ask the manufacturer to confirm Isc acceptance.

Calculation assumes: 1 identical strings across 1 used input(s).

Do not assume extra panel wattage is accepted. The manufacturer must approve oversizing; an input may clip or reject it.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

×Current per used input

10.6 ALimit: ≤ 10 AOutside limit

?Power per used input

400 WLimit: ≤ 300 WVerify

One 11–60V input, 10A and 300W maximum. The exact included solar lead varies by bundle and market.

Short-circuit current (Isc): 11.4 A per used input. Above the modeled current limit: ask the manufacturer to confirm Isc acceptance.

Calculation assumes: 1 identical strings across 1 used input(s).

Do not assume extra panel wattage is accepted. The manufacturer must approve oversizing; an input may clip or reject it.

✓Charging voltage

37.6 VLimit: 11–55 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 55 VWithin limit

×Current per used input

10.6 ALimit: ≤ 8 AOutside limit

?Power per used input

400 WLimit: ≤ 220 WVerify

One 11–55V input, 8A and 220W maximum on the RIVER 3 Plus base unit.

Short-circuit current (Isc): 11.4 A per used input. Above the modeled current limit: ask the manufacturer to confirm Isc acceptance.

Calculation assumes: 1 identical strings across 1 used input(s).

Do not assume extra panel wattage is accepted. The manufacturer must approve oversizing; an input may clip or reject it.