Anker SOLIX · power station
C1000
The original C1000 pairs 1,056 Wh with 1,800 W continuous output and a 600 W solar input. It weighs 12.9 kg and is a different model from the C1000 Gen 2.
Will this work for me?
How long this device should run. A daily average, such as a fridge, uses 24 hours.
✓ Energy and power fit this calculation.
Not a full compatibility guarantee.
Needed: 65 W × 8 hours + 5 W, 85% efficiency and 10% reserve ≈ 732 Wh. This one has 1,056 Wh, 1,800 W continuous and 2,400 W peak.
Payments never change technical recommendations, calculations or compatibility matching. Advertising and paid placements will be clearly labelled.
Key specs
Manufacturer support · United Kingdom / Europe guide
Look closer, when you want to.
- Battery capacity
- 1,056 Wh
- Continuous AC output
- 1,800 W
- Weight
- 12.9 kg
- Solar input, maximum
- 600 W
Your setup, made clear
What would you like to power?
Start with an example or add your own devices. The estimate updates as you go.
Example: workspace
2 devicesEverything that needs to run together.
Usage, connection & starting peak
Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.
Usage, connection & starting peak
Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.
Reserve & conversion loss85% efficiency · 10% reserve
Example values are estimates. Use the real power draw of your devices for a more personal result.
Look closer, when you want to.
What can I connect?Cables, ports and solar input
What comes in the box?
AC charging is normally supported, but package contents vary by bundle and country.
Solar connection
XT60 / XT60i
11–60V · 12.5A · 600W max per input
Check the solar cable →USB-C
100W + 30W
For 12V devices, also verify voltage, polarity, current and fuse—not only the plug shape.
Check my connection →Open Solar Lab →Specifications & sourcesManufacturer data, separate from estimates
- Continuous AC output
- 1,800 W
- Solar input
- 600 W · 11–60 V · 12.5 A per input
- Solar connector
- XT60 / XT60i
- USB-C
- 100W + 30W
- Weight
- 12.9 kg · 28.4 lb (source)
- Transfer behaviour
- 20ms transfer
- Dimensions
- 376 × 205 × 267mm
- Battery type
- LiFePO₄
A transfer time is not a promise of uninterrupted UPS operation. Test critical equipment.
Evidence and source details
Anker documents 1,056Wh, 1,800W inverter output, 11–60V/600W solar input and 20ms UPS transfer for this regional model.
- Source type
- Manufacturer support
- Source region
- United Kingdom / Europe guide
- Last checked
Your Power Setup has not physically tested this unit. Calculations are not reviews or proof of compatibility.
Open manufacturer source ↗Is this model right for me?Uses and regional considerations
Solar-oriented camps, faster replenishment and mixed medium-power appliance loads.
The cited guide is the UK/EU version; confirm the exact AC model and included solar lead in other markets.
Plan what I need first →Simple runtime examplesCalculated ranges, not physical tests
- Starlink Mini25–40 W
- 21.1–38 h
- Laptop workstation45–100 W
- 8.4–21.1 h
- CPAP planning load40–60 W
- 14.1–23.8 h
- 12V fridge while running35–55 W
- 15.4–27.2 h
A fridge cycles on and off. Actual runtime can differ from these continuous-use examples.
Questions about this model
How much energy does the C1000 store?
The manufacturer lists 1,056 Wh. Conversion loss and a reserve reduce the energy available to your devices.
How much power can it deliver?
Normal continuous output is 1,800 W. A short surge figure does not prove that every motor or appliance can start.
Which solar panel can I use?
The documented input range is 11–60 V, up to 600 W total. Also check current, cold open-circuit voltage, connector and polarity.
Still comparing?
Compare capacity, output and the exact regional version.