Anker SOLIX · power station
F3800
A 3,840Wh wheeled station with 6,000W continuous 120/240V split-phase output and two solar inputs totaling 2,400W.
Will this work for me?
How long this device should run. A daily average, such as a fridge, uses 24 hours.
✓ Energy and power fit this calculation.
Not a full compatibility guarantee.
Needed: 65 W × 8 hours + 5 W, 85% efficiency and 10% reserve ≈ 732 Wh. This one has 3,840 Wh, 6,000 W continuous and 9,000 W peak.
Payments never change technical recommendations, calculations or compatibility matching. Advertising and paid placements will be clearly labelled.
Key specs
Manufacturer specification · North American specification
Look closer, when you want to.
- Battery capacity
- 3,840 Wh
- Continuous AC output
- 6,000 W
- Weight
- 60 kg
- Solar input, maximum
- 2,400 W
Your setup, made clear
What would you like to power?
Start with an example or add your own devices. The estimate updates as you go.
Example: workspace
2 devicesEverything that needs to run together.
Usage, connection & starting peak
Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.
Usage, connection & starting peak
Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.
Reserve & conversion loss85% efficiency · 10% reserve
Example values are estimates. Use the real power draw of your devices for a more personal result.
Look closer, when you want to.
What can I connect?Cables, ports and solar input
What comes in the box?
AC charging is normally supported, but package contents vary by bundle and country.
Solar connection
XT60
11–60V · 27A · 1200W max per input
Check the solar cable →USB-C
3 × 100W
For 12V devices, also verify voltage, polarity, current and fuse—not only the plug shape.
Check my connection →Open Solar Lab →Specifications & sourcesManufacturer data, separate from estimates
- Continuous AC output
- 6,000 W
- Solar input
- 2,400 W · 11–60 V · 27 A per input
- Solar connector
- 2 × XT60
- USB-C
- 3 × 100W
- Weight
- 60 kg · 132.3 lb (source)
- Transfer behaviour
- <20ms UPS
- Dimensions
- 702 × 388 × 395mm
- Battery type
- LFP
A transfer time is not a promise of uninterrupted UPS operation. Test critical equipment.
Evidence and source details
Anker documents 3,840Wh LFP capacity, 6,000W continuous and 9,000W surge output, two 1,200W solar inputs, three 100W USB-C ports, under-20ms UPS transfer and 60kg weight.
- Source type
- Manufacturer specification
- Source region
- North American specification
- Last checked
Your Power Setup has not physically tested this unit. Calculations are not reviews or proof of compatibility.
Open manufacturer source ↗Is this model right for me?Uses and regional considerations
North American workshops, RVs and high-output backup where 120/240V flexibility matters more than carrying weight.
Anker labels this model for North American power standards. At 60kg it is a wheeled system rather than a normal carry, and individual 120V outlets remain limited below the 6,000W system total.
Plan what I need first →Simple runtime examplesCalculated ranges, not physical tests
- Starlink Mini25–40 W
- 76.8–138.2 h
- Laptop workstation45–100 W
- 30.7–76.8 h
- CPAP planning load40–60 W
- 51.2–86.4 h
- 12V fridge while running35–55 W
- 55.9–98.7 h
A fridge cycles on and off. Actual runtime can differ from these continuous-use examples.
Questions about this model
How much energy does the F3800 store?
The manufacturer lists 3,840 Wh. Conversion loss and a reserve reduce the energy available to your devices.
How much power can it deliver?
Normal continuous output is 6,000 W. A short surge figure does not prove that every motor or appliance can start.
Which solar panel can I use?
The documented input range is 11–60 V, up to 2,400 W total. Also check current, cold open-circuit voltage, connector and polarity.
Still comparing?
Compare capacity, output and the exact regional version.