Anker SOLIX · power station
C800
A compact 768Wh station with 1,200W ordinary AC output, 300W solar input, two USB-C outputs and documented 20ms transfer behavior.
Will this work for me?
How long this device should run. A daily average, such as a fridge, uses 24 hours.
✓ Energy and power fit this calculation.
Not a full compatibility guarantee.
Needed: 65 W × 8 hours + 5 W, 85% efficiency and 10% reserve ≈ 732 Wh. This one has 768 Wh, 1,200 W continuous and 1,600 W peak.
Payments never change technical recommendations, calculations or compatibility matching. Advertising and paid placements will be clearly labelled.
Key specs
Manufacturer manual · Regional manual; hardware must be confirmed
Look closer, when you want to.
- Battery capacity
- 768 Wh
- Continuous AC output
- 1,200 W
- Weight
- 10.5 kg
- Solar input, maximum
- 300 W
Your setup, made clear
What would you like to power?
Start with an example or add your own devices. The estimate updates as you go.
Example: workspace
2 devicesEverything that needs to run together.
Usage, connection & starting peak
Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.
Usage, connection & starting peak
Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.
Reserve & conversion loss85% efficiency · 10% reserve
Example values are estimates. Use the real power draw of your devices for a more personal result.
Look closer, when you want to.
What can I connect?Cables, ports and solar input
What comes in the box?
AC charging is normally supported, but package contents vary by bundle and country.
Solar connection
XT60
11–60V · 10A · 300W max per input
Check the solar cable →USB-C
100W + 30W
For 12V devices, also verify voltage, polarity, current and fuse—not only the plug shape.
Check my connection →Open Solar Lab →Specifications & sourcesManufacturer data, separate from estimates
- Continuous AC output
- 1,200 W
- Solar input
- 300 W · 11–60 V · 10 A per input
- Solar connector
- XT60
- USB-C
- 100W + 30W
- Weight
- 10.5 kg · 23.1 lb (source)
- Transfer behaviour
- 20ms transfer
- Dimensions
- 371 × 205 × 250mm
- Battery type
- LiFePO₄
A transfer time is not a promise of uninterrupted UPS operation. Test critical equipment.
Evidence and source details
Anker documents 768Wh LFP capacity, 1,200W ordinary AC output, 11–60V/300W solar input, 20ms transfer and 10.5kg weight.
- Source type
- Manufacturer manual
- Source region
- Regional manual; hardware must be confirmed
- Last checked
Your Power Setup has not physically tested this unit. Calculations are not reviews or proof of compatibility.
Open manufacturer source ↗Is this model right for me?Uses and regional considerations
Camping, connectivity, laptops and short backup loads where lower weight matters more than a 1kWh battery.
The 1,600W SurgePad figure is a special appliance mode, not the ordinary 1,200W inverter rating; verify motor and compressor starts separately.
Plan what I need first →Simple runtime examplesCalculated ranges, not physical tests
- Starlink Mini25–40 W
- 15.4–27.6 h
- Laptop workstation45–100 W
- 6.1–15.4 h
- CPAP planning load40–60 W
- 10.2–17.3 h
- 12V fridge while running35–55 W
- 11.2–19.7 h
A fridge cycles on and off. Actual runtime can differ from these continuous-use examples.
Questions about this model
How much energy does the C800 store?
The manufacturer lists 768 Wh. Conversion loss and a reserve reduce the energy available to your devices.
How much power can it deliver?
Normal continuous output is 1,200 W. A short surge figure does not prove that every motor or appliance can start.
Which solar panel can I use?
The documented input range is 11–60 V, up to 300 W total. Also check current, cold open-circuit voltage, connector and polarity.
Still comparing?
Compare capacity, output and the exact regional version.