Language and regionEnglish · United StatesUS

The model. Your possibilities.

Anker SOLIXC800

A compact 768Wh station with 1,200W ordinary AC output, 300W solar input, two USB-C outputs and documented 20ms transfer behavior.

Manufacturer specifications · check your regional version

Portable powerProduct profile
Anker SOLIX C800 · 768 Wh
C800 · LiFePO₄source: Anker SOLIX ↗
Battery capacity
768 Wh
Continuous AC output
1,200 W
Weight
10.5 kg
Solar input, maximum
300 W

Your setup, made clear

What would you like to power?

Start with an example or add your own devices. The estimate updates as you go.

Example: workspace

2 devices

Everything that needs to run together.

AC outlet · editable planning values
Usage, connection & starting peak

Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.

AC outlet · editable planning values
Usage, connection & starting peak

Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.

Reserve & conversion loss85% efficiency · 10% reserve

Example values are estimates. Use the real power draw of your devices for a more personal result.

Look closer, when you want to.

What can I connect?Cables, ports and solar input

What comes in the box?

AC charging is normally supported, but package contents vary by bundle and country.

Solar connection

XT60

11–60V · 10A · 300W max per input

Check the solar cable →

USB-C

100W + 30W

For 12V devices, also verify voltage, polarity, current and fuse—not only the plug shape.

Check my connection →Open Solar Lab →
Specifications & sourcesManufacturer data, separate from estimates
Continuous AC output
1,200 W
Solar input
300 W · 11–60 V · 10 A per input
Solar connector
XT60
USB-C
100W + 30W
Weight
10.5 kg · 23.1 lb (source)
Transfer behaviour
20ms transfer
Dimensions
371 × 205 × 250mm
Battery type
LiFePO₄

A transfer time is not a promise of uninterrupted UPS operation. Test critical equipment.

Evidence and source details

Anker documents 768Wh LFP capacity, 1,200W ordinary AC output, 11–60V/300W solar input, 20ms transfer and 10.5kg weight.

Source type
Manufacturer manual
Source region
Regional manual; hardware must be confirmed
Last checked

Your Power Setup has not physically tested this unit. Calculations are not reviews or proof of compatibility.

Open manufacturer source ↗
Is this model right for me?Uses and regional considerations

Camping, connectivity, laptops and short backup loads where lower weight matters more than a 1kWh battery.

The 1,600W SurgePad figure is a special appliance mode, not the ordinary 1,200W inverter rating; verify motor and compressor starts separately.

Plan what I need first →
Simple runtime examplesCalculated ranges, not physical tests
Starlink Mini25–40 W
15.4–27.6 h
Laptop workstation45–100 W
6.1–15.4 h
CPAP planning load40–60 W
10.2–17.3 h
12V fridge while running35–55 W
11.2–19.7 h

A fridge cycles on and off. Actual runtime can differ from these continuous-use examples.

United States · 120V / 60Hz

Type A/B · NEMA 1-15 / 5-15
Higher-power outlets require an exact-system check
an applicable United States safety certification mark
Verify it on the physical US unit.
Grid context
United States · 120V / 60Hz
Checked
US · 2026-08-20

Shared technical data does not prove a United States model, outlet layout, warranty, seller or availability.

Calculate runtime

Questions about this model

How much energy does the C800 store?

The manufacturer lists 768 Wh. Conversion loss and a reserve reduce the energy available to your devices.

How much power can it deliver?

Normal continuous output is 1,200 W. A short surge figure does not prove that every motor or appliance can start.

Which solar panel can I use?

The documented input range is 11–60 V, up to 300 W total. Also check current, cold open-circuit voltage, connector and polarity.

Still comparing?

Compare capacity, output and the exact regional version.

Compare models →