Starlink Mini
Manufacturer-sourced range- Typical range
- 25–40 W
- Starting value
- 40 W
- Brief peak
- 60 W
Check and edit these values once you have a nameplate or measurement.
Choose your camera battery and the gear you take. We calculate the energy reserve, charging route and suitable portable-power options.
This planner shows no UK model or offer. The UK electrical baseline is 230 V at 50 Hz with Type G (BS 1363) sockets: confirm the exact mains variant, fused plug, supplied lead and the whole charging path separately, and check the charger, cable, plug and current rating individually. A UK model number, box contents, conformity, availability, delivery and warranty are not confirmed here.
Build my shoot plan ↓No technical knowledge required · every value remains editable
Start with the closest situation. You can change every number in the next step.
Counts are per day. We include charging loss and add a 20% reserve.
Charging a flash battery or using a studio flash: choose the right calculation.
Enter your studio flash’s details. You can also choose an exact model in the device finder below.
Enter valid values for flash energy, flash count, modeling light and duration. Leave an unknown electrical peak blank.
Electrical peak still unknown: this energy calculation does not confirm that a power station can power your flash.
A cold or older battery can supply less energy.
The estimate uses the battery data and calculation assumptions shown with this result. That is not a measurement of the battery’s current condition. Cold and battery ageing are not calculated separately.
Cold is not the same as wear. Cold can temporarily limit the available energy and the power that can be delivered. Ageing can permanently reduce the storage capacity, even when the screen shows ‘100% charged’.
Follow the temperature limits for charging and using from the manual of your model. Check important applications with your own setup.
More about our battery assumptionsThis separate calculation is not added to your charging plan automatically. Do not also count charging the same flash battery.
Add equipment that is not listed above, such as a photo printer or monitor.
Exact models show their source. If the model is not indexed yet, use an editable category estimate instead.
8 of 27 results shown · search or filter to narrow the list
Check and edit these values once you have a nameplate or measurement.
Check and edit these values once you have a nameplate or measurement.
Check and edit these values once you have a nameplate or measurement.
Check and edit these values once you have a nameplate or measurement.
Check and edit these values once you have a nameplate or measurement.
Check and edit these values once you have a nameplate or measurement.
Check and edit these values once you have a nameplate or measurement.
Check and edit these values once you have a nameplate or measurement.
That covers about 50Wh per day, charging loss and a 20% reserve.

Sony publishes 16.4Wh for the NP-FZ100. Fujifilm publishes 16Wh for the NP-W235. Generic presets are editable planning values, not a claim about a specific product. Laptop, phone, drone and light values are conservative starting points and should be replaced with the exact label or manual when the shoot matters.
Count every battery, charger, laptop and light you will actually recharge on location, with their running and charging watts.
Allow a practical reserve and a charging order for critical equipment, and keep the highest-power charges separated from the lowest.
Verify the 230V/50Hz Type G version of any station, charger or light, and the exact model supplied in the UK before relying on it.
The record above is shared technical content from the international edition, not proof of a United Kingdom retail offer. For the equipment planned with this tool, confirm the exact 230V/50Hz Type G execution, supplied mains lead and socket layout, model suffix, UK certification, warranty and local support before purchase. No UK price in pounds sterling, stock, retailer, warranty or affiliate offer is verified yet, and no buying link is active. Regional model, socket layout, supplied mains lead, local support and seller route must all be confirmed independently.