100W N-Type Bifacial
Compact fixed arrays on vans, sheds and cabins where a 100W module fits the available space.
- Rated power
- 100W
- Working voltage
- 23.6 V
- Connector
- Solar connectors
23.6V Vmp · 28.5V Voc · Rigid panel
Use the exact RSP100DCT label and do not add an assumed rear-side gain to the array total.
Does this panel fit my power station?Check connectors and limits.ViewClose+
Electrical reference
Series multiplies voltage. Parallel multiplies current. The Solar Lab applies both before checking a station.
Specifications and sourcesPower, voltage and the manufacturer data.ViewClose+
One panel at standard test conditions.
Series multiplies voltage. Parallel multiplies current. The Solar Lab applies both before checking a station.
Explain Vmp, Voc, Imp and Isc →- Rated power
- 100 W
- Vmp · working voltage
- 23.6 V
- Voc · open-circuit voltage
- 28.5 V
- Imp · working current
- 4.24 A
- Isc · short-circuit current
- 4.45 A
- Connector
- Solar connectors
- Format / model
- Rigid panel
- Voc temperature coefficient
- -0.26%/°C
Use the exact label and official source.
Names can survive a revision, so compare every value with the physical product or local manual.
This panel can also collect light from the back. Our calculation leaves that possible extra output out to avoid an optimistic result.
Questions and other panelsMore explanation and comparable models.ViewClose+
The main answers before you connect.
Does the Renogy 100W N-Type Bifacial fit every power station?
No. Beyond 100W, the working voltage, the highest voltage in the cold, the current, the connector and the polarity all have to stay inside the station limits.
What is the difference between working voltage and open-circuit voltage?
Under load the working voltage is 23.6V. With no load connected the panel can reach 28.5V, and in cold weather that can rise further.
Can I connect several of these panels?
That depends on the wiring. In series the voltage adds up; in parallel the current adds up. Test the complete array in the Solar Lab.