Your panels. The right connection.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 15 AWithin limit

✓Power per used input

400 WLimit: ≤ 500 WWithin limit

Two independent 11–60V inputs; each accepts 15A and 500W, for 1,000W total.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 14.5 AWithin limit

✓Power per used input

400 WLimit: ≤ 600 WWithin limit

One XT60i input: 11–28V at 8.2A, then 29–60V at 14.5A, with 600W maximum.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 12 AWithin limit

✓Power per used input

400 WLimit: ≤ 700 WWithin limit

Two DC8020 inputs share a 1,400W ceiling. Jackery documents 11–17.5V at 8A and 17.5–60V at 12A per input, with 24A combined maximum.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 12 AWithin limit

?Power per used input

400 WLimit: ≤ 200 WVerify

Two DC8020 inputs share a 400W ceiling. Jackery documents 11–16V at 8A and 16–60V at 12A per high-voltage input, with 21A combined maximum.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Do not assume extra panel wattage is accepted. The manufacturer must approve oversizing; an input may clip or reject it.

Modeled power ceiling: 200 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–165 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 165 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 17 AWithin limit

✓Power per used input

400 WLimit: ≤ 1,600 WWithin limit

This check models the 11–165V, 17A and 1,600W high-PV input. A separate low-PV input accepts 11–60V, 17A and 800W; together Anker lists 2,400W total.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Only the listed primary input is modeled. This station has another, different PV input that this result does not model.

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 11–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

✓Current per used input

10.6 ALimit: ≤ 27 AWithin limit

✓Power per used input

400 WLimit: ≤ 1,200 WWithin limit

Two XT60 inputs accept up to 1,200W each. Current bands depend on firmware: newer firmware lists 10A at 11–15V and up to 27A at 15–60V; verify the installed firmware before designing an array.

Short-circuit current (Isc): 11.4 A per used input. Still verify protection and wiring requirements.

Calculation assumes: 1 identical strings across 1 used input(s).

Modeled power ceiling: 400 W. A limit, not a forecast of solar yield or permission to connect.

✓Charging voltage

37.6 VLimit: 16–60 VWithin limit

✓Voltage in cold weather

49.1 VLimit: < 60 VWithin limit

×Current per used input

10.6 ALimit: ≤ 10.5 AOutside limit

?Power per used input

400 WLimit: ≤ 200 WVerify

Two parallel DC8020 inputs; each supports 200W and 10.5A, for 400W total with matched panel groups.

Short-circuit current (Isc): 11.4 A per used input. Above the modeled current limit: ask the manufacturer to confirm Isc acceptance.

Calculation assumes: 1 identical strings across 1 used input(s).

Do not assume extra panel wattage is accepted. The manufacturer must approve oversizing; an input may clip or reject it.