The model. Your possibilities.
BLUETTIElite 100 V2
The Elite 100 V2 pairs 1,024 Wh with up to 1,000 W solar input, plus 140W and 100W USB-C ports, at 11.5 kg.
Manufacturer specifications · check your regional version
- Battery capacity
- 1,024 Wh
- Continuous AC output
- 1,800 W
- Weight
- 11.5 kg
- Solar input, maximum
- 1,000 W
Your setup, made clear
What would you like to power?
Start with an example or add your own devices. The estimate updates as you go.
Example: workspace
2 devicesEverything that needs to run together.
Usage, connection & starting peak
Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.
Usage, connection & starting peak
Use measured power where possible. A listed peak does not confirm its duration or the real starting behaviour.
Reserve & conversion loss85% efficiency · 10% reserve
Example values are estimates. Use the real power draw of your devices for a more personal result.
Look closer, when you want to.
What can I connect?Cables, ports and solar input
What comes in the box?
AC charging is normally supported, but package contents vary by bundle and country.
Solar connection
BLUETTI solar cable with two MC4 pairs
12–60V · 20A · 1000W max per input
Check the solar cable →USB-C
140W + 100W
For 12V devices, also verify voltage, polarity, current and fuse—not only the plug shape.
Check my connection →Open Solar Lab →Specifications & sourcesManufacturer data, separate from estimates
- Continuous AC output
- 1,800 W
- Solar input
- 1,000 W · 12–60 V · 20 A per input
- Solar connector
- MC4 → proprietary DC input
- USB-C
- 140W + 100W
- Weight
- 11.5 kg · 25.3 lb (source)
- Transfer behaviour
- ≤10ms UPS
- Dimensions
- 320 × 215 × 250mm
- Battery type
- LiFePO₄
A transfer time is not a promise of uninterrupted UPS operation. Test critical equipment.
Evidence and source details
BLUETTI documents 1,024Wh LFP capacity, 1,800W AC output, 12–60V/20A/1,000W DC input, 140W plus 100W USB-C and 11.5kg weight.
- Source type
- Manufacturer manual
- Source region
- Multiple regional variants documented
- Last checked
Your Power Setup has not physically tested this unit. Calculations are not reviews or proof of compatibility.
Open manufacturer source ↗Is this model right for me?Uses and regional considerations
Solar-heavy 1kWh setups, remote work and backup loads that benefit from strong USB-C output at relatively low weight.
The manual warns that motor and compressor startup can reach two to four times rated power. Regional AC voltage and socket layouts still require confirmation.
Plan what I need first →Simple runtime examplesCalculated ranges, not physical tests
- Starlink Mini25–40 W
- 20.5–36.9 h
- Laptop workstation45–100 W
- 8.2–20.5 h
- CPAP planning load40–60 W
- 13.7–23 h
- 12V fridge while running35–55 W
- 14.9–26.3 h
A fridge cycles on and off. Actual runtime can differ from these continuous-use examples.
United States · 120V / 60Hz
- Type A/B · NEMA 1-15 / 5-15
- Higher-power outlets require an exact-system check
- an applicable United States safety certification mark
- Verify it on the physical US unit.
- Grid context
- United States · 120V / 60Hz
- Checked
- US · 2026-08-20
Shared technical data does not prove a United States model, outlet layout, warranty, seller or availability.
Calculate runtimeQuestions about this model
How much energy does the Elite 100 V2 store?
The manufacturer lists 1,024 Wh. Conversion loss and a reserve reduce the energy available to your devices.
How much power can it deliver?
Normal continuous output is 1,800 W. A short surge figure does not prove that every motor or appliance can start.
Which solar panel can I use?
The documented input range is 12–60 V, up to 1,000 W total. Also check current, cold open-circuit voltage, connector and polarity.
Still comparing?
Compare capacity, output and the exact regional version.