Victron Energy
SmartShunt 500A/50mV
Installed vehicle, boat or cabin battery systems where total DC charge and discharge must be measured over time.
- Measurement path
- Installed DC system
- Range
- 500A shunt class · 6.5–70V DC supply
- Execution
- Installed 6.5–70V DC battery systems
Before use
This is an installed high-current shunt, not a plug-in tester. Correct negative-path placement, fusing and cable work require the manual and competent installation.
What can this meter measure?Measurement range and technical limits.View detailsClose+
Key limits
Know the meter limits before connecting.
Battery voltage, current, amp-hours, state of charge and time-to-go
- Supply voltage
- 6.5–70V DC
- Current class
- 500A / 50mV
- Current accuracy
- ±0.4%
- Voltage accuracy
- ±0.3%
How to use this meterWorkflow, cautions and official instructions.View detailsClose+
Safe measurement
From connection to a useful measurement.
- 01Choose the correct shunt size for the system
- 02Install every load and charger through the monitored negative path
- 03Configure battery capacity and charge parameters
- 04Use logged current, amp-hours and state of charge to validate the setup
Source checked on 2026-08-22
Open the official manufacturer source ↗Read the instructions for this exact model.
Versions, plugs, certification and availability vary by country. These are source-model technical references, not confirmed Philippine supply or compatibility. Follow the manufacturer’s limits.